Project: Nixie Clocks – Preventing Electrocution

Because this project operates largely at mains voltages, it is important that the circuit is not exposed when powered on. I also want to make sure that the board doesn’t slide around on my desk, potentially touching me. So I quickly put together a stand for the board to give the board a bit of weight and hold the board above the desk to prevent shorts (e.g. due to touching a screwdriver). So far this has been effective!

image

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s